Uv power puck ii manual




















Can be useful for system setup and troubleshooting. The user can store the selected UV reading in the radiometer as a base line or reference reading, then compare that reading to another. The radiometer will display both readings and indicate the percentage of change between readings. Graphs at right illustrate both a one and two-lamp system. Unit of Measure - The unit of measure is user selectable to provide ease of reading for operators.

Display the data as you want to see it. Download collected data to a computer for statistical analysis and data logging, and process verification. The user is able to adjust the effective sample rate to one of three settings in the set-up menu of the instrument. The effective sample rate is based on the Data not Optical Filter Bandwidth.

EIT instruments use different bandwidths for the data filters. If the unit detects an internal problem, it will display one or more of the following error codes in the upper left corner on the display. This based on our historical data and experience. This data is a culmination of over twenty years of calibration experience. Most of these units are exposed to extreme environmental conditions and though they are very robust; Page 17 Service Request Form.

You will be responsible for damage incurred from inadequate packaging, if the original packaging is not used. This exclusion includes merchantability and fitness, as well as any and all other obligations or liabilities of EIT. EIT shall not be responsible for consequential damages resulting from malfunctions of the goods described in this manual. Page Appendix A: Optics Cleaning wood manufacturing facility.

Careful cleaning of the outer optics using these guidelines will help your EIT instrument perform as designed between service intervals at EIT. The guidelines are general and specific questions should be directed to EIT uv eit. The Power Puck II UV Radiometer first set the standard for the UV industry and is now setting a new standard with advanced features, a colorful, easy-to-read display, multiple user-selectable modes and PC communications for data logging and trending capabilities.

With user-selectable sample rates, this reliable instrument can be used for fast conveyor lines or slower lines. The standard 10W unit works well for high-power UV curing applications. The new mid-range unit 1W works well with lower power arc lamps and applications with lamps that are non-focused or a little further away from the cure surface.

The low power unit mW works well in exposure systems and applications with low power lamps.



0コメント

  • 1000 / 1000