Dlink router att dsl setup

There is no need for you to do this yourself. It is possible for a computer or device that is manually configured to have an address that does reside within this range. Your D-Link router, by default, has a static IP address of This means that addresses This is almost the same as when a device has a static IP address except that the device must still request an IP address from the D-Link router. The D-Link router will provide the device the same IP address every time.

Servers on your network should either use a static IP address or use this option. You can assign a name for each computer that is given a reserved IP address. This may help you keep track of which computers are assigned this way. Example: Game Server. A MAC address is usually located on a sticker on the bottom of a network device. The MAC address is comprised of twelve digits. Each pair of hexadecimal digits are usually separated by dashes or colons such as D or D As an alternative, you can locate a MAC address in a specific operating system by following the steps below:.

Firmware Version: 2. Product Page: DIR Network Settings. Virtual Server. Port Forwarding. Application Rules. Access Control. Website Filter. Inbound Filter. Firewall Settings. Advanced Wireless. Wi-Fi Protected Setup. Dynamic DNS. Internet Sessions. Reboot needed Your changes have been saved. Configuration Warnings.

Internet Connection Setup Wizard If you are new to networking and have never configured a router before, click on Setup Wizard and the router will guide you through a few simple steps to get your network up and running. Manual Configure If you consider yourself an advanced user and have configured a router before, click Manual Configure to input all the settings manually. Wireless The wireless section is used to configure the wireless settings for your D-Link router.

Enable Wireless This option turns off and on the wireless connection feature of the router. When you set this option, the following parameters are in effect. Scheduling for Wireless Settings When Wireless is enabled, the default selection for scheduling is "Always".

Selections for other schedules will be available in the drop down menu after users define schedules in the "Schedule" page. This function gets disabled when wireless is disabled.

Wireless Network Name When you are browsing for available wireless networks, this is the name that will appear in the list unless Visibility Status is set to Invisible, see below. This name is also referred to as the SSID. For security purposes, it is highly recommended to change from the pre-configured network name.

Enable Auto Channel Scan If you select this option, the router automatically finds the channel with least interference and uses that channel for wireless networking. If you disable this option, the router uses the channel that you specify with the following Wireless Channel option.

Wireless Channel A wireless network uses specific channels in the wireless spectrum to handle communication between clients. Some channels in your area may have interference from other electronic devices. Choose the clearest channel to help optimize the performance and coverage of your wireless network. If you have some devices that use a different transmission mode, choose the appropriate "Mixed" mode. The other options are available for special circumstances.

Transmission Rate By default the fastest possible transmission rate will be selected. You have the option of selecting the speed if necessary. Visibility Status The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless network name is broadcast to anyone within the range of your signal.

If you're not using encryption then they could connect to your network. Security Mode Unless one of these encryption modes is selected, wireless transmissions to and from your wireless network can be easily intercepted and interpreted by unauthorized users. WEP A method of encrypting data for wireless communication intended to provide the same level of privacy as a wired network. Example: bit hexadecimal keys are exactly 10 characters in length. Example: Wireless Networking technology enables ubiquitous communication.

The IP information is manually entered in your IP configuration settings. Your ISP provides you with all of this information. Some ISP's require you to make some settings on your side before your router can connect to the Internet. DSL providers typically use this option. This method of connection requires you to enter a Username and Password provided by your Internet Service Provider to gain access to the Internet.

The settings are: Always on: A connection to the Internet is always maintained. On demand: A connection to the Internet is made as needed. Manual: You have to open up the Web-based management interface and click the Connect button manually any time that you wish to connect to the Internet. This method of connection is primarily used in Europe.

The following options apply to all WAN modes. The IP address is also used to access this Web-based management interface. It is recommended that you use the default settings if you do not have an existing network. Your local area network settings are based on the address assigned here.

For example, Subnet Mask The subnet mask of your router on the local area network. Local Domain Name This entry is optional. Enter a domain name for the local network. So, for example, if you enter mynetwork. If you want to create a bookmark to the router management page, click OK.

Click Cancel if you do not want to create a bookmark. If you clicked Yes, a window may appear depending on what web browser you are using to create a bookmark. Now, parents can view sites kids are visiting and what devices are connected to your network.

You may choose Next to register this device with mydlink for free. Or you may choose Skip to register later. To get started with mydlink Cloud Services, you are required to have a mydlink account and need to register this router to the mydlink account. Then choose Login.

Note: The mydlink password is the password to log in to the mydlink web portal and mydlink mobile apps. Sorry we couldn't help! Click here for more FAQs or go to Support.

How do I set up and install my router? Did you find this useful? Yes No people found this useful. Thank you for your feedback. These may also help:. How do I back up the router configuration to my computer?

Read Answer How do I reset my router to factory default settings? Read Answer.