Panasonic lz3 manual

Acrobat Reader is available free from the Adobe website whose link is on the left. Added Removed. Please read and accept the terms of use before downloading this document. I accept the terms of use below. Terms of Use 1. Contents of the Operating Instructions Site a. MODE] and then press 1.

It varies depending on the recording condition and the types of SD memory Card. Rotate the zoom lever towards [ ] [T] to return to the previous screen.

You can confirm the location of the displayed picture in all the recorded pictures with this scroll bar. If you return to the previous screen, the indications on the screen are displayed as in normal playback mode.

When you rotate the zoom lever towards [ ] [T], the magnification becomes higher. When you set the magnification to 1k, the indications on the screen are displayed as in normal playback mode. After playback starts, the motion picture recording time disappears and the elapsed playback time is displayed on the bottom right of the screen. To pause Press 3 during motion picture playback. However, you cannot play audio only with the camera.

Refer to P62 to 68 for each menu item. P61 This function allows you to reproduce a white color close to real life in pictures recorded under sunlight, halogen lighting etc.

Select a setting that matches the recording conditions. When you take a picture beyond the available white balance range, the picture may appear reddish or bluish. Also, auto white balance may not operate properly if the subject is surrounded by many light sources.

In these cases, set the white balance to a mode other than [AUTO]. P61 ISO is a measure of sensitivity to light. The higher the sensitivity is set, the less light is needed to take a picture so the camera becomes more suitable for recording in dark places. ISO sensitivity 80 Use in bright places e. P61 A digital picture is made of numerous dots called pixels. Picture quality refers to the compression rate when saving digital pictures. Select to take pictures with the same aspect ratio as 35 mm film.

This is also suitable for playing back pictures on a wide-screen TV, high-definition TV etc. When a smaller picture size [ ] 0. P61 By changing the aspect ratio, you can select an angle of view that matches the subject. Fine Low compression : This gives priority to picture quality. Picture quality will be high. Standard High compression : This gives priority to the number of recordable pictures. Standard quality pictures are recorded. This is a function which further extends the optical zoom ratio.

If you select a picture size with EZ displayed, the zoom ratio is extended to a maximum of 8. P61 You can record audio with the still picture if this is set to [ON].

This means you can record the conversation that took place when you were recording or an explanation of the picture.

Recording will automatically stop about 5 seconds later. There is no need to press and hold the shutter button. The audio is not recorded. P61 Select the mode that matches the recording conditions and the composition. This is effective when the subject is not in the center of the screen.

Spot-focusing : The camera focuses on a limited narrow area in the screen. ON The AF assist lamp turns on in low light conditions.

At this time, the AF assist lamp icon [ ] appears on the screen. The focus position is not predetermined. It is set to a position automatically determined by the camera at the time of focusing. If you want to determine the focus position to take pictures, switch the AF mode to 1-area-focusing mode High speed , 1-area-focusing mode or Spot-focusing mode. In this case, it will become more difficult to focus on the subject. P61 Illuminating the subject makes it easier for the camera to focus when recording in low light conditions that make focusing difficult.

P61 The shutter speed is automatically adjusted. However, if you want brighter pictures you can manually select an even slower shutter speed. WARM The picture becomes reddish. P61 Select an effect that matches the recording situation and your image of the recording. We recommend using a tripod and the self-timer P42 for taking pictures. P61 Select a color effect that matches the recording conditions and your image of the recording.

To avoid noise, we recommend setting [PICT. P69 This is recommended when playing back pictures on a TV screen.

Press 3 again to cancel pause. P69 You can do the following if a mark has been added to pictures and they have been set as favorites. For information about this, refer to the separate operating instructions for PC connection.

Exif is a file format for still pictures which allows recording 72 VQT0U87 information etc. P69 DPOF Digital Print Order Format is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. When you want to use a photo printing store to print pictures recorded on the built-in memory, copy them to a card P77 and then set the DPOF setting.

DPOF print settings on the card are canceled when a card is inserted. You cannot set all the pictures at one time. For further information, ask at your photo printing store or refer to the operating instructions for the printer. This feature allows you to write print information to media and then use the information on a DPOF-compliant system. The date printing setting on the printer may take priority over the date printing setting on the camera. Check the date printing setting on the printer also.

P69 You can set protection for pictures you do not want to be deleted by mistake. P69 You can add the audio after taking a picture. P69 This function is useful if you want to reduce the file size of a picture to attach it to an e-mail or upload it to a website. The original audio is overwritten. P69 You can enlarge and then clip the important part of the recorded picture.

Resized pictures cannot be restored when they are overwritten. Select [NO] and newly create a resized picture. The trimmed pictures cannot be restored when they are overwritten. Select [NO] and newly create a trimmed picture. P69 You can copy recorded picture data from the built-in memory to a card or vice versa. Perform step 2 2 Press 2 1 to select the picture and then press 4.

The illustration shows the screen when pictures are copied from the built-in memory to a card. The data on the built-in memory or the card may be damaged or lost. P69 Usually, it is not necessary to format the built-in memory and the card. The illustration shows the screen when the built-in memory is formatted. Even if the pictures were recorded with a Panasonic digital camera, you may not be able to copy them if they were edited with a PC.

Set the DPOF settings again after copying is finished. When a card is inserted, you can format the card. However, all the pictures will be deleted. Check the data carefully before formatting. If you forcibly insert the USB connection cable at a slant or upside down you can deform the connection terminals and damage the camera or the connected equipment.

Select [Cancel] to close the messages and disconnect the camera from the PC. The drive then appears on the [My Computer] folder. JPG 2 3 P JPG P If the number of pictures exceeds , another folder is created. It is recorded in a folder with a new number. Pictures will be recorded to a new folder with a number sequential to the folder recorded to immediately before. By using [NO. RESET] on a card that does not contain folders or pictures, such as one just formatted, the folder number can be reset to They cannot be written to a card or deleted.

In this case, stop the communication at once on the PC. The information on the card may be damaged. Disconnect the USB connection cable before replacing the card.

If a card is inserted, you can edit or access the pictures on it. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert or remove the card and then connect the USB connection cable to the PC again. Set print settings such as the print quality on the printer beforehand.

Read the printer operating instructions. If a card is inserted, you can edit or access the picture data on it. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert or remove the card and then connect the USB connection cable to the printer again.

For details, refer to the operating instructions of the printer. OFF Date is not printed. ON Date is printed. Press 4 to select. VQT0U87 Settings on the printer are prioritized. Check the date print setting on the printer also. Depending on the printer, the icon may not be displayed. If not printing, disconnect the USB connection cable. After finishing printing, make sure there are no problems with the printer. OUT] terminal on the camera with the video cable supplied.

In this case, change the screen mode setting. Motion picture recording time P59 e. Keep the camera as far away as possible from electromagnetic equipment such as microwave ovens, TVs, video games etc. Then reinsert the batteries or reconnect AC adaptor and turn the camera on. Do not use the camera near radio transmitters or high-voltage lines. Always use the supplied cords and cables. If you use optional accessories, use the cords and the cables supplied with them.

Do not extend the cords or the cables. Do not spray the camera with insecticides or volatile chemicals. Do not use benzine, thinner or alcohol for cleaning the camera. To remove stubborn stains, wipe with a cloth that is soaked in a detergent diluted with water and then with a soft, dry cloth. Lastly, wipe the camera again with a dry cloth.

Do not bend or drop the card. If you drop the batteries accidentally, check to see if the body of the batteries and the terminals are damaged.

Bring charged spare batteries when going out. Dispose of unusable batteries. Call the RBRC hotline on for information. Do not allow battery terminals to come into contact with metal objects such as necklaces, hairpins, etc.

The major messages are described below as examples. Move the switch back to unlock it. If you want to delete some pictures, format the card after saving necessary data on a PC etc. More than favorites have been set. Moreover, pictures recorded or edited by other equipment may not be copied. Format the built-in memory on the camera again. P78 The data on the built-in memory will be deleted.

Format the card again with the camera after saving necessary data on a PC etc. Turn the camera off and on. If the message persists, contact the dealer or your nearest servicenter. Insert the card again. Do not use a card with a capacity more than 2 GB. Make sure the card is inserted properly and then play back again. Turn the camera off and remove the card.

Insert the card again and turn the camera on. Make sure the camera is turned off before removing or inserting the card to avoid damage. P81 Format the card after saving necessary data on a PC etc. P78 Troubleshooting If you return the menu settings to the initial settings at the time of purchase, the condition may improve. The remaining battery power is low even if new batteries are inserted. Do not disassemble, heat above 60 xC oF or incinerate. Page 4 Panasonic Model No. Operation is subject to the For each step, be sure to refer to the pages indicated in brackets.

Charge the battery. Pass the string through the hole on the lens cap. Page 14 Before Use Pass the strap through the ring first, and then pass through the stopper and fasten the strap. A Pull the strap 2 cm 0. Charge the battery before use. Charge the battery in a temperature between 10 oC to 35 oC 50 oF to 95 oF. When the optical image stabilizer function is set to [AUTO]. Store the removed battery in the battery carrying case supplied.

Using the quick menu By using the quick menu, some of the menu settings can be easily found. Set the time in your home area and travel destination. Set the departure date and the return date of the vacation. Page 25 Preparation These menu settings make it easier to see the LCD monitor when you are in bright places. Page 26 Preparation In manual focus, the assistance screen appears on the center of the screen to facilitate focusing on the subject.

Page 27 Preparation When the folder number reaches , the number cannot be reset. We recommend formatting the card P28 after saving the data on a PC or elsewhere. Page 28 If the built-in memory or the card cannot be formatted, consult your nearest Service Center. Page 30 Preparation Switch the mode by rotating the mode dial. Align a desired mode with part B. Page Select The Aspect Ratio Preparation Select the Aspect Ratio This allows you to select the aspect ratio of the pictures to suit printing or the playback method.

Switching the aspect ratio selector switch. You can take pictures with greater freedom by changing various settings in [REC] menu. Page Scene Detection Basic Press the shutter button halfway to focus. In other cases, it is displayed at the point on the subject which is in focus. Focus will keep following the subject automatically even if it moves. Refer to for details. Press 1. Repeat this step. During playback zoom P41 , while playing back motion pictures P95 and during a slide show P92 , you can only select This is used when dividing the entire screen into 3k3 for taking pictures with a well-balanced composition.

B To close the flash Press the flash until it clicks. Page 47 Advanced Recording pictures If you take a picture with a dark background landscape, this feature will slow the shutter speed when the flash is activated so that the dark background landscape will become bright. Simultaneously it reduces the Slow sync. Flash setting Shutter speed Sec.

Take the pictures. At this time, the selected item is automatically set. Press the shutter button halfway to focus and then press it fully to take the picture. Multi Aspect Pressing the shutter button once automatically takes three pictures with aspect ratios of [], [] and [] with a single shutter sound. The exact timing of this depends on the type of card, the picture size and the quality. Take a picture.