Qsc 181 manual

Previous Page. Next Page. Page 2 Birch plywood enclosure 2. Steel grille 3. Front LED 4. Cast aluminum handles 2 5. M10 rigging points 11 7. Slip-resistant feet Page 7 KW— Single 18" Subwoofer 1. M20 threaded pole receptacle 7. Slip-resistant feet 9. Feet cups for stacking The pole socket on the KW does not allow tilting. Page 9 Installation Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, cabinets, transducers, brackets and associated equipment for damage.

Any missing, corroded, deformed, or non-load rated component could significantly reduce the strength of the installation or placement.

Any such condition severely reduces the safety of the installation and should be immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term, unexpected overloading. Page 10 As shipped from the factory, each installation point has a flat head screw installed to acoustically seal the loudspeaker system and retain the sleek look of the enclosure.

Page Input Connections AC mains power cord is properly attached to the loudspeaker and plugged into the AC source outlet. Verify the outlet is functioning properly. If the AC mains cord is serviceable and the AC mains outlet is operating properly, but the loudspeaker fails to operate, the loudspeaker may require servicing. Page 13 Unbalanced Inputs Connect to the plug as shown. If a 3 conductor TRS plug is used to connect an unbalanced source, Pin 3 and pin 1 must be connected with a jumper as shown.

The signal on this output is exactly equivalent to the signal from the corresponding input. The level of the output signal is not affected by the gain set on the subwoofer gain knob.

Page 16 These functions include crossovers, time alignment, limiting and protection, thermal management and a number of proprietary features. From the factory, the switch is set to FLAT. This means that the loudspeaker system is producing a flat response through the vocal band. This is the standard setting for most applications. Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other QSC KLA owners to properly answer your question.

This manual comes under the category Speakers and has been rated by 1 people with an average of a 7. This manual is available in the following languages: English. Is your question not listed? KL A1 2 — 1 2" 2-way Loudspeaker. KL A1 8 1 — 1 8" Subwoofer. Ask a question. Related product manuals. When is my volume too loud?